Kelly McLaughlin
Well-Known Member
Hi Folks, looking for this adapter for my new to me lathe I also need a drawbar is anyone has anything thats surplus the'd like to sell!
-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
5c collet nose adaptor for lathe spindle
- Thread starter Kelly McLaughlin
- Start date
Kelly McLaughlin
Well-Known Member
Its 5 mt so it's the right one, I have a 5C chuck with a 1 1/2-8 back plate perhaps a trade? let me know what you think and want. my nunber is 403-878-2555
Six O Two
(Marco)
I'm thinking about making one of these for myself as I need one as well. Do they need to be ground in, or could I get away with strictly lathe work?
Otherwise, Grizzly does sell these also.
Otherwise, Grizzly does sell these also.
Rauce
Ultra Member
The one I have is turned. I don’t see the same one on eBay anymore but the seller was making them on a CNC lathe.
To make one yourself, I would only rough in the ID features at first, turn the MT and then finish machine the collet seat in place.
I’ll take photos of the pieces tonight and figure out how much I paid for these things. I’ll be in touch.
To make one yourself, I would only rough in the ID features at first, turn the MT and then finish machine the collet seat in place.
I’ll take photos of the pieces tonight and figure out how much I paid for these things. I’ll be in touch.
Tom Kitta
Ultra Member
I have it as a project to do. Turning it on a lathe should not be a big deal. For me I have taper MT4.5 so either I have to be a bit off by using MT4 as template or try to set the compound to MT4.5 angle and hope the angle I found for MT4.5 is indeed correct.
Doing the 5C part should not be an issue at all - I did ER40 and it worked out great.
Doing the 5C part should not be an issue at all - I did ER40 and it worked out great.
Kelly McLaughlin
Well-Known Member
There's some on ebay so thats definetly an option The Grizzly one I'm seeing questionable runout so it would probably have to be indexed and ground in. I'd make one but my list is already ridiculous, starting with a cabinet / bench to put the new lathe on : ) I'll wait for Rauce's reply : )
Rauce
Ultra Member
You can use a test indicator in the spindle bore to get the angle for the compound.
I’ve done it before, although with an external taper, to make chuck backplates.
Tom Kitta
Ultra Member
Yes, good idea - I can just measure the angle from... what I have!
Main problem will be actually seeing the indicator - maybe I use extended leg.
Rauce
Ultra Member
Yes I guess you would need a test indicator with a longer probe. I have a mitutoyo one that would probably go 2” in while still being able to read the dial.
The other thing is getting the tip on center. If you have a tool height standard I think getting the ball on the probe lined up by eye would be good enough.
This is what I use for measuring inside bores. You can get longer tips for it too but lose some resolution in proportion to the new vs old tip length ratio. The barrel will go into most rifle barrel chambers. It would work fine for your needs.
Edit - didn't expect the image to be this big!
Just realized this is a classified post. Strictly speaking, discussion is not allowed.
Since this is your ad @Kelly McLaughlin , are you ok with it as is, or would you prefer I stripped the thread of anything not directly related to your request?
Since this is your ad @Kelly McLaughlin , are you ok with it as is, or would you prefer I stripped the thread of anything not directly related to your request?
Kelly McLaughlin
Well-Known Member
No Problem! it's all good information. The discussion has convinced me I shouldn't be so lazy and just make my collet chuck fit the new lathe : ) Thanks for asking though!
Tom Kitta
Ultra Member
I believe discussion is not allowed which would be related to say price of the item as being too high etc. Asking questions about the item is OK. Or as here stuff related to the item. Besides - this is a wanted ad not "sale ad" - so we are now talking about fulfilling member need with him making the part.
I mean I could post a wanted ad for MT4.5 adapter to ... anything, MT3, MT4, 5C, ER40 etc. I know chances are next to zero so discussing how to make one yourself seem OK.
BTW, if anyone has such adapter I would not mind buying it. Given its MT4.5 it would be British or US made and I doubt I can make a better part at home.
The intent is to prevent upsetting the one posting the ad. In most cases in the past, the problem has been negative comments about the poster's item or as you say, their price.
But we have been pretty strict about removing even related discussion lest it lead to the former, and also because some members have complained that discussion waters down the focus of their original post.
In this case, I myself posted a suggestion to you about measuring a taper. I did that without realizing that the thread was in the classifieds section. I wasn't the only one who did that. That's why I asked the OP if he would like the discussion portion removed or moved.