-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
4x6 bandsaw Calgary
- Thread starter Johnwa
- Start date
Pm sent
Johnwa
Ultra Member
Sold. Thanks @John Conroy
Danzo187
Member
love the movable jaw set up, I'll be drilling and tapping (1/2-13 X 5") my Jet saw tonight. jeez after 50 years ya think I would have done that, sometimes the simplest things are the hardest to learn.
thanks
Dan
Here's, a shameless sales plug.... my shop for sale $2.50 a pound I'm 3 1/2 hours south of Sherbrook, Quebec
thanks
Dan
Here's, a shameless sales plug.... my shop for sale $2.50 a pound I'm 3 1/2 hours south of Sherbrook, Quebec
Johnwa
Ultra Member
@Danzo187 I made a quick release nut
canadianhobbymetalworkers.com
it’s at a bit of an angle to to the jaw. When the jaw is tightened the leaverage forces the threaded rod into the nut threads.
Daily Shop Improvement
I needed a place to keep a notepad at the mill so a little cut and chop on a bit of aluminium (1/8 plate) and attached it to one of the head bolts. Until I find a better clamp to hold the notepad a spring clamp will have to do. This machine is like mine. Just different color.
canadianhobbymetalworkers.com
it’s at a bit of an angle to to the jaw. When the jaw is tightened the leaverage forces the threaded rod into the nut threads.