• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

12x36 Victor Lathe in Calgary Kijiji $2200

C

calgaryguy

Chris
EDIT: Corrected swing to 16" per the ad, I misread it initially.

https://www.kijiji.ca/v-power-tool/calgary/victor-lathe/1532907006

$2200
16x36 Victor
Ad says no tooling, Firm price.

Any idea if these can do metric and imp threads?

Same seller has a bridgeport (2200) and a DoAll metal bandsaw (800) forsale.

1604266596602.webp
 
Last edited:
It's 3 phase. That will turn many people off - but you can get a 1 phase motor. Maybe a used motor. Looks tired. Is it in reasonable shape?
 
Yes, they will do both metric and imperial threads.

x2 regarding just running it on a VFD. They have a 7.5hp main motor.

Older machines were made in Taiwan, newer ones come from the PRC.

This on has the electrical controls below the QCGB ==> Made in Taiwan
 
RobinHood said:
Yes, they will do both metric and imperial threads.

x2 regarding just running it on a VFD. They have a 7.5hp main motor.

Older machines were made in Taiwan, newer ones come from the PRC.

This on has the electrical controls below the QCGB ==> Made in Taiwan
Click to expand...

I assume the implication is that the older Taiwanese models are superior?
 
That’s what I read. Adam Booth (abom79 on YouTube) has one in his shop. He seems to like it.
 
RobinHood said:
That’s what I read. Adam Booth (abom79 on YouTube) has one in his shop. He seems to like it.
Click to expand...
Yes, I saw Abom79's most recent video where he adjusts the headstock bearings on his Victor - he states it was his dads from the late 70's and he's pretty happy with it.
 
All prices listed are... very good unless machines are destroyed. Lathe is excellent price if even in moderately decent condition. If you can have it for just 2000 its a total steal!. Note make sure its not a junk. If these are not junk then don't worry about 3ph - at this price point you can afford to go 3ph. I even do not buy 1ph machines now & if I use a motor I frequently go 3ph by default.

Same for the BP - excellent deal - make sure its not junk (total) if its just a bit beaten --- its a steal. Get it.

Try to lower price by getting multiple machines. DoAll is excellent price as well. The horizontal is a so-so price but not bad.

Make sure its *not* junk. Really check before you buy. If not junk get full package - such deals come once in every few years.

Once again, don't care about 3ph but make really, really, really sure its not a total junk.
 
You must log in or register to reply here.
Back
Top